Search for pair production of heavy vector-like quarks decaying into high-pT W bosons and top quarks in the lepton-plus-jets final state in pp collisions at √s=13 TeV with the ATLAS detector

A search is presented for the pair production of heavy vector-like B quarks, primarily targeting B quark decays into a W boson and a top quark. The search is based on 36.1 fb−1 of pp collisions at s√=13 TeV recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. Data are analysed in the lepton-plus-jets final state, characterised by a high-transverse-momentum isolated electron or muon, large missing transverse momentum, and multiple jets, of which at least one is b-tagged. No significant deviation from the Standard Model expectation is observed. The 95% confidence level lower limit on the B mass is 1350 GeV assuming a 100% branching ratio to Wt. In the SU(2) singlet scenario, the lower mass limit is 1170 GeV. The 100% branching ratio limits are found to be also applicable to heavy vector-like X production, with charge +5/3, that decay into Wt. This search is also sensitive to a heavy vector-like B quark decaying into other final states (Zb and Hb) and thus mass limits on B production are set as a function of the decay branching ratios

Search for invisible Higgs boson decays in vector boson fusion at √s=13 TeV with the ATLAS detector

We report a search for Higgs bosons that are produced via vector boson fusion and subsequently decay into invisible particles. The experimental signature is an energetic jet pair with invariant mass of O(1) TeV and O(100) GeV missing transverse momentum. The analysis uses 36.1 fb−1 of pp collision data at √s=13 TeV recorded by the ATLAS detector at the LHC. In the signal region the 2252 observed events are consistent with the background estimation. Assuming a 125 GeV scalar particle with Standard Model cross sections, the upper limit on the branching fraction of the Higgs boson decay into invisible particles is 0.37 at 95% confidence level where 0.28 was expected. This limit is interpreted in Higgs portal models to set bounds on the wimp–nucleon scattering cross section. We also consider invisible decays of additional scalar bosons with masses up to 3 TeV for which the upper limits on the cross section times branching fraction are in the range of 0.3–1.7 pb

Prompt and non-prompt J/ψ elliptic flow in Pb+Pb collisions at √sNN=5.02 Tev with the ATLAS detector

The elliptic flow of prompt and non-prompt J/ψJ/ψ was measured in the dimuon decay channel in Pb+Pb collisions at sNN−−−√=5.02sNN=5.02 TeVTeV with an integrated luminosity of 0.42 nb−10.42 nb−1 with the ATLAS detector at the LHC. The prompt and non-prompt signals are separated using a two-dimensional simultaneous fit of the invariant mass and pseudo-proper decay time of the dimuon system from the J/ψJ/ψ decay. The measurement is performed in the kinematic range of dimuon transverse momentum and rapidity 9<pT<309<pT<30 GeVGeV, |y|<2|y|<2, and 0–60% collision centrality. The elliptic flow coefficient, v2v2, is evaluated relative to the event plane and the results are presented as a function of transverse momentum, rapidity and centrality. It is found that prompt and non-prompt J/ψJ/ψ mesons have non-zero elliptic flow. Prompt J/ψJ/ψ v2v2decreases as a function of pTpT, while for non-prompt J/ψJ/ψ it is, with limited statistical significance, consistent with a flat behaviour over the studied kinematic region. There is no observed dependence on rapidity or centrality

The Layer 0 Inner Silicon Detector of the D0 Experiment

This paper describes the design, fabrication, installation and performance of the new inner layer called Layer 0 (L0) that was inserted in the existing Run IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab Tevatron collider. L0 provides tracking information from two layers of sensors, which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm respectively from the beam axis. The sensors and readout electronics are mounted on a specially designed and fabricated carbon fiber structure that includes cooling for sensor and readout electronics. The structure has a thin polyimide circuit bonded to it so that the circuit couples electrically to the carbon fiber allowing the support structure to be used both for detector grounding and a low impedance connection between the remotely mounted hybrids and the sensors.Comment: 28 pages, 9 figure

Precise measurement of the top quark mass in the dilepton channel at D0

We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel.Comment: 7 pages, 4 figure

Double parton interactions in photon+3 jet events in ppbar collisions sqrt{s}=1.96 TeV

We have used a sample of photon+3 jets events collected by the D0 experiment with an integrated luminosity of about 1 fb^-1 to determine the fraction of events with double parton scattering (f_DP) in a single ppbar collision at sqrt{s}=1.96 TeV. The DP fraction and effective cross section (sigma_eff), a process-independent scale parameter related to the parton density inside the nucleon, are measured in three intervals of the second (ordered in pT) jet transverse momentum pT_jet2 within the range 15 < pT_jet2 < 30 GeV. In this range, f_DP varies between 0.23 < f_DP < 0.47, while sigma_eff has the average value sigma_eff_ave = 16.4 +- 0.3(stat) +- 2.3(syst) mb.Comment: 15 pages, 13 figure

Evidence for an anomalous like-sign dimuon charge asymmetry

We measure the charge asymmetry A of like-sign dimuon events in 6.1 fb(-1) of p (p) over bar collisions recorded with the D0 detector at a center-of-mass energy root s = 1.96 TeV at the Fermilab Tevatron collider. From A, we extract the like-sign dimuon charge asymmetry in semileptonic b-hadron decays: A(sl)(b) = -0.00957 +/- 0.00251 (stat) +/- 0.00146 (syst). This result differs by 3.2 standard deviations from the standard model prediction A(sl)(b)(SM) = (-2.3(0.6)(+0.5)) x 10(-4) and provides first evidence of anomalous CP violation in the mixing of neutral B mesons

Prototype ATLAS IBL Modules using the FE-I4A Front-End Readout Chip

The ATLAS Collaboration will upgrade its semiconductor pixel tracking detector with a new Insertable B-layer (IBL) between the existing pixel detector and the vacuum pipe of the Large Hadron Collider. The extreme operating conditions at this location have necessitated the development of new radiation hard pixel sensor technologies and a new front-end readout chip, called the FE-I4. Planar pixel sensors and 3D pixel sensors have been investigated to equip this new pixel layer, and prototype modules using the FE-I4A have been fabricated and characterized using 120 GeV pions at the CERN SPS and 4 GeV positrons at DESY, before and after module irradiation. Beam test results are presented, including charge collection efficiency, tracking efficiency and charge sharing.Comment: 45 pages, 30 figures, submitted to JINS

Dependence of the ttˉt\bar{t} production cross section on the transverse momentum of the top quark

We present a measurement of the differential cross section for $t\bar{t}$ events produced in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV as a function of the transverse momentum ($p_T$) of the top quark. The selected events contain a high-$p_T$ lepton ($\ell$), four or more jets, and a large imbalance in $p_T$, and correspond to 1 fb${}^{-1}$ of integrated luminosity recorded with the D0 detector. Each event must have at least one candidate for a $b$ jet. Objects in the event are associated through a constrained kinematic fit to the $t\bar{t}\to WbW\bar{b} \to \ell\nu b q\bar{q}'\bar{b}$ process. Results from next-to-leading-order perturbative QCD calculations agree with the measured differential cross section. Comparisons are also provided to predictions from Monte Carlo event generators using QCD calculations at different levels of precision.Comment: 8 pages, 6 figures, 4 tables, updated to reflect the published versio

Measurement of the t-channel single top quark production cross section

The D0 collaboration reports direct evidence for electroweak production of single top quarks through the t-channel exchange of a virtual W boson. This is the first analysis to isolate an individual single top quark production channel. We select events containing an isolated electron or muon, missing transverse energy, and two, three or four jets from 2.3 fb^-1 of ppbar collisions at the Fermilab Tevatron Collider. One or two of the jets are identified as containing a b hadron. We combine three multivariate techniques optimized for the t-channel process to measure the t- and s-channel cross sections simultaneously. We measure cross sections of 3.14 +0.94 -0.80 pb for the t-channel and 1.05 +-0.81 pb for the s-channel. The measured t-channel result is found to have a significance of 4.8 standard deviations and is consistent with the standard model prediction.Comment: 7 pages, 6 figure